FT1-M4-4023x-P035

100Mbp/s Ethernet, SFF Optical Transceiver

The FT1-M4 SFF high performance module for dual fiber communications can transmit digital data up to 2 km via Multi mode optical fiber and the optical performances comply with the Fast Ethernet interface, 155Mbps ATM interface and FDDI PMD Standard.

  • RoHS/UL/TUV/FDA/CB compliant
  • Dual Fiber Transceiver
  • Distance Up to 2km under 62.5/125um MMF
  • Small Form Factor 2 x 5 Footprint
  • Single +3.3 V Power Supply
  • LVPECL Differential Inputs and Outputs
  • LVPECL Signal of Detector Output
  • DC/DC Inputs and Outputs

( Topr=TAMB,3.15 V < Vcc < 3.45 V )

Parameter Symbol Min Typ. Max Units Note
Optical
Output Optical Power Pout -20 -17 -14 dBm 1
Extinction Ratio ER 8.2 - - dB
Output Eye Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Center Wavelength λC 1260 1310 1360 nm
Spectral Width(FWHM) Δλ - - 200 nm RMS(σ)
Rise/Fall Time Tr/Tf 0.6 - 3.0 ns 2
Total Jitter Tj - - 1.2 ns 3
Deterministic Jitter TDDJ - - 0.6 ns -
Random Jitter TRJ - - 0.69 ns -
Electrical
Power Supply Current Icc - - 160 mA 4
Differential Input Voltage VIH-VIL 300 - - mV 5
Data Input Voltage-Low VIL- Vcc -2.0 - -1.58 V
Data Input Voltage-High VIH- Vcc -1.1 - -0.74 V

Notes:
1. Output power is coupled into a 62.5/125 μm Multi-mode fiber.
2. 10% to 90% Values. Maximum tR,tF times tested against eye mask.
3. Measured with a 223 -1 PRBS with 72 ones and 72 zeros.
4. Maximum current is specified at Vcc = Maximum @ maximum temperature.
5. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.

*Specifications are subject to change without notice.