S0301E

3G/HD/SD-SDI over Single mode SFP-type Fiber Optic Extender

The S0301E is an ideal and economic solution designed for transmission of multi-rate SDI video, with embedded audio and metadata over a single-mode fiber optic cable. The transmitter module receives one 3G/HD/SDI electrical input, perfectly converts SMPTE 292M, SMPTE 259M , SMPTE 424M or DVB-ASI electrical SDI signal to single-mode optic SDI signals. The receiver module receives optical signal from input SFP connector, and then perfectly converts it to electrical SDI signal. S0301E is immune to pathological pattern (SMPTE RP-198) without introducing any flickers, and this feature further guarantees the transmission quality over optical fibers.

Both transmitter and receiver provide equalizing and reclocking at input unit in order to re-construct the signal for consistent quality. The S0301E is perfect for today’s broadcast applications, including video production, video editing, studio to studio and studio to CATV head end. In addition, since transmission of content is inherently secure and immune to outside interference, fiber applications are favored in government, military, and medical environments.

  • Enable transmission of digital video signal over optical fiber*
    - up to 10 km (6.25 miles) [S0301E10]
    - up to 20 km (12.5 miles) [S0301E20)
    - up to 80 km (50 miles) [S0301E80]
  • Automatic cable EQ up to 300m (1000ft) at SD-SDI ,150m (500ft) at HD-SDI, or 90m (295ft) at 3G-SDI
  • Standard SFP-type fiber optic connector
  • Supports following protocols:
    - SMPTE 259M (270Mbps)
    - SMPTE 259M (360Mbps)
    - SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
    - SMPTE 424M / HDTV (2.97Gbps and 2.97/1.001Gbps)
    - DVB ASI (270Mbps)
  • Immune to RP-198 pathological patterns
  • Automatic reclocked
  • One SDI loop out(optional)
  • 3G/HD/SDI Input signal detection LED

Model Name S0301E
Technical S0301E-TX S0301E-RX
Role of usage Transmitter [TX] Receiver [RX]
SDI standards SD-SDI & HD-SDI & 3G-SDI
Auto HD/SD-SDI detection Yes
Supported protocols SMPTE 259M (270Mbps / 360Mpbs), DVB ASI (270Mbps)
SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
SMPTE 424M / HDTV (2.97Gbps and 2.97/1.001Gbps)
Video bandwidth [2.97Gpbs & 2.97/1.001Gbps]
Data rates 270 / 1483 / 1485 / 2967 / 2970Mbps
Video support [HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30,1080p60,1080p59.94
[SD] NTSC@59.94Hz, PAL@50Hz
SDI signal type SMPTE-424M,SMPTE-292M, SMPTE-259M, DVB-ASI
Output impedance 75Ω
Auto reclocker mode Automatic detection: 270Mbps / 1.483Gbps / 1.485Gbps/2.97Gbps/2.967Gbps
Automatic bypass: 177Mbps / 360Mbps / 540Mbps
Fiber Transmission 10km (6.25mi) [S0301E10] / 20km (12.5mi) [S0301E20] / 80km (50mi) [S0301E80]
Cable (Belden 1694A) equalization / transmission [3G HD-SDI] up to 90m (297ft)
[HD-SDI] up to 150m (500ft)
[SD-SDI] up to 300m (1000ft)
[3G HD-SDI] greater than 60m (196ft)
[HD-SDI] greater than 125m (410ft)
[SD-SDI] up to 300m (1000ft)
Loop-out 1 reclocking SDI loop-out optional upon request
Audio support Yes
RP-198 pathological patterns Immune
PCB Stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω]
Input 1x BNC [SDI] 1x Optical SFP [SDI]
Output 1x Optical SFP [SDI]
1x BNC [SDI] (optional loop-out)
1x BNC [SDI]
1x BNC [SDI] (optional upon request)
BNC connector Yes
Optical fiber connector Immune
Fiber optics Wavelength: 1310 nm [S0301E10]
Type: Single-mode
Jitter < 0.2 UI
Overshoot < 10%
Wavelength: 1550nm [S0301E20 / S0301E80]
Type: Single-mode
Jitter < 0.2 UI
Overshoot < 10%
Optical power:
[S0301E10]-3~-9 dBm [S0301E20] -2~-7 dBm [S0301E80] -1~4 dBm

*Specifications are subject to change without notice.