Products
OPM-M1 & OPM-M2
Optical Power Meter
The OPM-M1 or OPM-M2 Optical Power Meter is mainly used for checking the signal output power of the optical communication equipment in fiber-optic networks. It measures the average power of a continuous light beam which is emitted from the equipment or other optic sources. It measures power in both 850 nm (Multimode) and 1310 nm / 1490 nm / 1550 nm (Single-mode) respectively.
The universal connector can be used for all the most common fiber interfaces such as ST / SC / FC, and it is suitable to test both Single-mode and Multimode cables. With an optical 2.5 mm to 1.25 mm adapter, users can even test for a 1.25 mm fiber interface.
- Robust, handy design with LED digital readout.
- Easy to check Multimode 850 nm output power.
- Easy to check Single-mode 1310 nm / 1490 nm / 1550 nm output power.
- Universal 2.5 mm to 1.25 mm adaptor for SC / ST / FC to LC or MU
- 3 Digits resolution and Low Voltage Battery warning LED display.
- Measuring power in within -40 dBm ~ +5 dBm ranges.
| Wavelength | OPM-M1: 1310 nm / 1490nm / 1550 nm OPM-M2: 850 nm / 1310 nm / 1550 nm |
|---|---|
| Optical Power Range | -40 dBm ~ +5 dBm |
| Accuracy | 850 nm ≦± 0.5 dB 1310 nm / 1490nm / 1550 nm≦± 0.3 dB |
| Batteries | 2 x AAA [1.5V] |
| Resolution | 0.1 dB |
| Fiber Connector | Universal Type (Diameter: 2.5mm) |
| Display | 3 digits LED |
| Operating Temp. | 0℃ ~ 50℃ |
| Storage Temp. | 0℃ ~ 70℃ |
*Specifications are subject to change without notice.
- User Manual：OPM-M1 & OPM-M2 Optical Power Meter
| Part Number | Product Type | Wavelength(nm) | Range(dBm) |
|---|---|---|---|
| OPM-M1 | 3 Digits SM | 1310 / 1490 / 1550 nm | +5 ~ -40 dBm |
| OPM-M2 | 3 Digits SM & MM | 850 / 1310 / 1550 nm | +5 ~ -40 dBm |
| S200412 | LC adapter for Optical Power Meter | ||