TR1-M4-3023x-A2

1X9 Dual Fiber, Fast Ethernet 100 Mb/s, 1310 nm Tx / Rx

The 1×9 ST duplex 1310nm O-E Transceivers can transmit digital data up to 2 km via Multi-mode optical fiber and the optical performances comply with the Fast Ethernet interface, 155Mbps ATM interface and FDDI PMD Standard.

  • Distance up to 2 km
  • Industry Standard 1x9 Package Footprint
  • Duplex ST Connector
  • Single Power Supply +3.3 V
  • LVPECL Differential Data Inputs and Outputs
  • LVPECL Signal Detection Output
  • DC/DC Inputs and Outputs

( 0°C < Topr < 85°C,3.15 V < Vcc < 3.45 V )

Parameter Symbol Min Typ. Max Units Note
Optical
Output Optical Power Pout -15 - -8 dBm 1
Extinction Ratio ER 8.2 - - dB
Output Eye Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Center Wavelength λC 1260 1310 1360 nm
Spectral Width(FWHM) Δλ - - 200 nm RMS(σ)
Rise/Fall Time Tr,Tf 0.6 - 3.0 ns 2
Total Jitter Tj - - 1.2 ns 3
Electrical
Power Supply Current Icc - - 65 mA 4,6
Differential Input Voltage VIH-VIL 300 - - mV 5
Data Input Voltage-Low VIL- Vcc -2.0 - -1.58 V
Data Input Voltage-High VIH- Vcc -1.1 - -0.74 V

Notes:
1. Output power is coupled into a 62.5/125 μm Multi-mode fiber.
2. 10% to 90% Values. Maximum Tr, Tf times tested against eye mask.
3. Measured with a 223 -1 PRBS with 72 ones and 72 zeros.
4. Maximum current is specified at Vcc = Maximum @ maximum temperature.
5. These inputs are compatible with 10K, 10KH and 100K LVECL and LVPECL inputs.
6. Room temperature.

*Specifications are subject to change without notice.