Products
TR1-M4-2023N-A1
1X9 Dual Fiber, Fast Ethernet 100 Mb/s, 1310 nm Tx / Rx
The 1×9 SC duplex 1310nm O-E Transceivers can transmit digital data up to 2 km via Multi-mode optical fiber and the optical performances comply with the Fast Ethernet interface, 155Mbps ATM interface and FDDI PMD Standard.
- Distance up to 2 km
- Industry Standard 1x9 Package Footprint
- Duplex SC Connector
- Single Power Supply +3.3 V
- LVPECL Differential Data Inputs and Outputs
- LVPECL Signal Detection Output
- DC/DC Inputs and Outputs
( -40°C < Topr < 85°C，3.15 V < Vcc < 3.45 V )
| Parameter | Symbol | Min | Typ. | Max | Units | Note |
|---|---|---|---|---|---|---|
| Optical | ||||||
| Output Optical Power | Pout | -20 | - | -14 | dBm | 1 |
| Extinction Ratio | ER | 8.2 | - | - | dB | |
| Output Eye | Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 | |||||
| Center Wavelength | λC | 1260 | 1310 | 1360 | nm | |
| Spectral Width(FWHM) | Δλ | - | - | 200 | nm | RMS(σ) |
| Rise/Fall Time | Tr,Tf | 0.6 | - | 3.0 | ns | 2 |
| Total Jitter | Tj | - | - | 1.2 | ns | 3 |
| Electrical | ||||||
| Power Supply Current | Icc | - | - | 160 | mA | 4 |
| Differential Input Voltage | VIH-VIL | 300 | - | - | mV | 5 |
| Data Input Voltage-Low | VIL- Vcc | -2.0 | - | -1.58 | V | |
| Data Input Voltage-High | VIH- Vcc | -1.1 | - | -0.74 | V | |
Notes:
1. Output power is coupled into a 62.5/125 μm Multi-mode fiber.
2. 10% to 90% Values. Maximum Tr, Tf times tested against eye mask.
3. Measured with a 223 -1 PRBS with 72 ones and 72 zeros.
4. Maximum current is specified at Vcc = Maximum @ maximum temperature.
5. These inputs are compatible with 10K, 10KH and 100K LVECL and LVPECL inputs.
*Specifications are subject to change without notice.